Cable Tool Drilling Rig Historical

Cable Tool Drilling Rig Historical (HM1SW8)

Location: Casper, WY 82604 Natrona County
Buy Wyoming State flags at Flagstore.com!
Country: United States of America
Buy United States of America flags at Flagstore.com!

N 42° 50.853', W 106° 20.255'

  • 0 likes
  • 0 check ins
  • 0 favorites
  • 555 views
Inscription
Drilling rigs of this type were used from about 1878 into the 1950's. With the drilling of deeper wells, starting in the 1920's, cable-tool drilling was gradually replaced by more modern rotary-drilling methods. This replica was built using plans adapted from Report No. III of the Second Geological Survey of Pennsylvania, 1880. It incorporates many original parts donated by individuals and companies from operating oil fields in Natrona County.
Drilling is accomplished by an engine driving a belt or "band" which turns the band wheel. As the band wheel rotates, a crank on the band-wheel shaft connected by a pitman to one end of the beam rocks the beam up and down. The temper screw hangs from the other end of the walking beam and is clamped around the drilling cable. Cable is stored on the bull wheel from which it leads up through the derrick to the sheave on the crown block and then back down to the temper screw. The actually weight of the drilling operation is carried by the walking beam and temper screw. As the walking beam rocks up and down, a chisel-shaped bit on the bottom end of the cable is raised and dropped, pulverizing the rock at the bottom of the drill hole. The rock cuttings are removed by hoisting the bit out of the hole and lowering a bailer down the hole. The bailer is a hollow tube with a simple valve on its lower
end which opened when the bailer touches the bottom of the hole, and allows a slurry of cuttings to enter and fill the tube. When the bailer is hoisted, the weight of the cuttings close the valve, and when the bailer reaches the surface, it is swung away from the hole and dumped.
These rigs were capable of drilling to a depth greater than 9,000 feet. Over 300,000 wells in the United States were drilled with cable tools before the advent of rotary rigs. Many of Wyoming's important oil and gas fields were discovered and developed using rigs similar to this one.
The deepest cable-tool hole in Wyoming is the Resolute Oil Co. #1 Northern Pacific Railroad located in the SW NE Section 17, T. 57N., R. 101W., Park County. It took three years from 1928 to 1931 to reach a total depth of 8,723 feet. This well was the discovery for Badger Basin Field. It initially flowed 55 barrels per day of 50 degree API gravity oil and 250,000 cubic feet of gas per day from the Upper Cretaceous Frontier formation.
Details
HM NumberHM1SW8
Tags
Year Placed1993
Placed ByPetroleum Association of Wyoming
Marker ConditionNo reports yet
Date Added Saturday, July 2nd, 2016 at 5:01pm PDT -07:00
Pictures
Sorry, but we don't have a picture of this historical marker yet. If you have a picture, please share it with us. It's simple to do. 1) Become a member. 2) Adopt this historical marker listing. 3) Upload the picture.
Locationbig map
UTM (WGS84 Datum)13T E 390705 N 4744753
Decimal Degrees42.84755000, -106.33758333
Degrees and Decimal MinutesN 42° 50.853', W 106° 20.255'
Degrees, Minutes and Seconds42° 50' 51.18" N, 106° 20' 15.3" W
Driving DirectionsGoogle Maps
Area Code(s)307
Closest Postal AddressAt or near Platte River Pkwy, Casper WY 82604, US
Alternative Maps Google Maps, MapQuest, Bing Maps, Yahoo Maps, MSR Maps, OpenCycleMap, MyTopo Maps, OpenStreetMap

Is this marker missing? Are the coordinates wrong? Do you have additional information that you would like to share with us? If so, check in.

Check Ins  check in   |    all

Have you seen this marker? If so, check in and tell us about it.

Comments 0 comments

Maintenance Issues
  1. Is this marker part of a series?
  2. What historical period does the marker represent?
  3. What historical place does the marker represent?
  4. What type of marker is it?
  5. What class is the marker?
  6. What style is the marker?
  7. Does the marker have a number?
  8. This marker needs at least one picture.
  9. Can this marker be seen from the road?
  10. Is the marker in the median?